Sida 1 av 1

Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 14:53
av Philip Morberg
Hej,

är det någon som bet hur man gör en snabb uppdatering av avolites pearl tigers lampbibliotek?

Skulle behöva få in clay paky sharpy men har inte fått det att fungera på något smidigt sett.

Tack på förhand!

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 14:54
av Niklas Elste
du går vel och hämtar personligheten på avos sida och sen patchar in den

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 14:55
av Niklas Elste
http://personalities.avolites.com/" onclick="window.open(this.href);return false;

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 14:55
av Philip Morberg
det är väl där problemet ligger, hur man patchar in det.

Ni som inte orkar skriva får gärna kontakta mig på 0707795097

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 14:55
av Pontus Thorén
http://personalities.avolites.com/" onclick="window.open(this.href);return false;

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 14:56
av Niklas Elste
http://personalities.avolites.com/Perso ... 2008-1.exe" onclick="window.open(this.href);return false;

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 15:08
av Philip Morberg
Jag va nog lite otydlig, ber om ursäkt för det.

Mitt problem är hur man uppdaterar bordet med de nya lamporna.
Jag har försökt att gå in i system > usb stick options > sync fixtures > Avocach
Men när jag ska patcha får jag inte fram det uppdaterade biblioteket.


All hjälp är jag oerhört tacksam för, tack igen!

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 15:15
av Niklas Elste
kan tyvärr inte hjälpa dig mer än denhär texten då jag är 2000 ägare

Patching a fixture
Î Press Patch
Î Press B [Choose a fixture]
Î Press the softkey next to the “AVOCACH” USB drive
Î A list of fixture manufacturers is shown. Use Softkeys F and G to go
up and down the list and find the correct manufacturer of your
fixture, then press the Softkey next to the name to select it.
Î A list of fixture types is now shown. Use Softkeys F and G to go up
and down the list and find the correct fixture, then press the
Softkey next to the fixture to select it.
Î The Pearl will load the fixture information (this may take a few
seconds). The display shows information about the fixture.
Î The Pearl will ask “Use preset palettes?”.
Î Press A [Yes]. (This is explained later)
Î The Pearl will offer you the first free DMX address (on the top line
of the display). You can change this using the numeric keypad if
you want the fixture at a different address. 2. Patching - Page 11
Pearl 2008 Manual - 16th July 2007
Î Press the Swop button on handle 11 to patch the fixture you have
selected to handle 11.
Î The display will show the block of channels occupied by the fixture.
Î Patch more fixtures, or press Exit when you have finished

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 15:17
av Nicke Löfgren
Kör du med sticka så måste du ha en liten programsnutt på stickan så du ska hitta filen


Om nu jag har fattat ditt fel :)

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 15:24
av Nicke Löfgren
Här är en länk om det "problem" jag tror du har

http://www.avolites.com/Support/Console ... Stick.aspx" onclick="window.open(this.href);return false;

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 15:25
av Niklas Elste
får man inte med den om man tankar upp med exe filen?

på 2000 är det ju så att man får hela paketet på diketten

Re: Avolite pearl tiger - Akut!!!

Postat: lör 29 sep 2012, 15:56
av Nicke Löfgren
Tror inte det! Utan det är ett fristående "program"


Du är inte intresserad att köpa mitt 2008 bord? Ge ett bud, det ska bort ;)

Re: Avolite pearl tiger - Akut!!!

Postat: sön 30 sep 2012, 17:00
av Philip Morberg
Tack för all hjälp, det löste sig och det blev en jättebra kväll!

Re: Avolite pearl tiger - Akut!!!

Postat: sön 30 sep 2012, 17:15
av Nicke Löfgren
Å problemet var??